A new set of ghorajs made by Dieter Zarnitz. The wood comes from leftover pieces of a construction.
“Cumaru” is a very fine, hard and durable construction-wood. “Angelim Amargoso” is very heavy and rougher than Cumaru. Both grow in South America. The colour you see is the natural one. The setting (“jawari“) can be done at the Sitar Factory (Belgium).
… without words …
Technical info on strings & tuning:
Baj tar: steel 0,37mm (N°5) tuned to F#2 (MA)
Sa tar: bronze 0,46mm (N°26) tuned to C#2 (SA)
PA tar: bronze 0,56mm (N°24) tuned to G#2 (PA)
Laraj: bronze 0,72mm (N°22) tuned to C#1 (SA)
Kharaj: flatwound bronze 0,92mm (N°20) tuned to G#1 (SA)
Cikari’s: steel 0,30mm (N°3) & 0.28 (N°2) tuned to C#3 (SA) & C#4 (SA)
Tarav’s: steel 0,28mm (N°2)
… the ultimate guitar for sitarists …
Frédéric t’Serstevens is a young and talented sitarist and disciple of Shubhendra Rao and Kushal Das. Since in the beginning he was a dedicated (bass) guitarplayer, he came up with this rather common idea to convert a sitar into a guitar. But now in a suitable and really original way: why not make the accompanying strings, jora, laraj & kharaj, entirely playable on the full neck area?
On traditional sitars, it is common that these strings only can be played (without meend) up to the 4th, 5th, … 7th parda. From then onwards, very frequently, intonation problems occur due to a continuously and significantly increasing strings action. This means that the distance between the string and the frets (pardas) increases too much, and thus the played notes become higher… until unplayable.
The solution is very simple: reduce the strings action by changing the shape of the pardas.
original shape (Rikhi Ram)
hybrid shape (Sitar Factory)
With this kind of new hybrid pardas, mounted on a raised parda lane, the action on the strings is higly reduced. And as such coming very close to a near perfect intonation, comparable to a guitar:
Now even chords can be played perfectly on this instrument… making it the extreme sitar for guitarists, or,… reverse ?? Or just: the ultimate hybrid sitar… 🙂
For more details, please read (on this site): The modification of an acoustic travel sitar into an electric hybrid guitar-sitar.
It began with an ordinary crack. Yet another case of overzealous luggage handling at airports. Very regrettable, but in this case it revealed an underlying and overwhelming problem. 
A tumba is made out of a gourd, which is a natural product. As it grows on the field, the shape becomes more or less irregular, as squiggly as nature can be. But in a musical instruments setting this isn’t always very usable or good-looking…
Thus here and there some cosmetics are necessary to give it a more practical, handsome round shape. To obtain this, in general, plaster is applied. But sometimes regular plastering isn’t adequate. When more than a couple of millimeters difference in levelling needs to be adjusted a heavier and stronger filler is needed. Then sawdust, wooden dust, water and woodglue are well mixed and applied prior to the plaster mixture.
Thus, when repairing the crack, more and more chunks of almost already pulverised wooden dust filler simply fell off from the tumba. Finally, almost the complete surface seems to be covered and more than 50% became loose.
In order to obtain a better bonding the plaster is mixed with woodglue as well. A lot of work…, a lot of drying time needed…, sanding, filling, drying, sanding, filling, drying, sanding…, fine sanding, sealing, colouring and finally the finishing touch with shellac.
